Motherboard | Super X10DRG-H |
CPU | Intel® Xeon® processor E5-2600 v4†/ v3 family (up to 145W TDP) * |
Dual Socket R3 (LGA 2011) |
Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
System Bus | QPI up to 9.6 GT/s |
Note | † BIOS version 2.0 or above is required |
* Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
GPU/Xeon Phi Support | K1/K2/K10/K40/K80/M40/M60/Xeon Phi |
Memory Capacity | 16x 288-pin DDR4 DIMM slots |
Up to 2TB† ECC 3DS LRDIMM, 1TB ECC RDIMM |
Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
DIMM Sizes | RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB |
LRDIMM: 64GB, 32GB |
3DS LRDIMM: 128GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors |
Chipset | Intel® C612 chipset |
SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
IPMI | Support for Intelligent Platform Management Interface v.2.0 |
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
ASPEED AST2400 BMC |
Network Controllers | Intel® i350-AM2 Dual Port Gigabit Ethernet |
Virtual Machine Device Queues reduce I/O overhead |
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
Graphics | ASPEED AST2400 BMC |
SATA | 10x SATA3 (6Gbps) ports |
LAN | 2x RJ45 Gigabit Ethernet ports |
1x RJ45 Dedicated IPMI LAN port |
USB | 4x USB 3.0 ports (2 rear, 2 via header) |
2x USB 2.0 ports (2 via headers) |
Video | 1x VGA Connector |
Serial Port | 1x Serial header |
BIOS Type | 128Mb SPI Flash EEPROM with AMI® BIOS |
BIOS Features | Plug and Play (PnP) |
APM 1.2 |
DMI 2.3 |
PCI 2.3 |
ACPI 1.0 / 2.0 / 3.0 |
USB Keyboard support |
SMBIOS 2.7.1 |
UEFI |
Form Factor | 1U Rackmount |
Chassis | CSE-118GH-R1K66B |
Height | 1.7" (43mm) |
Width | 17.2" (437mm) |
Depth | 30.6" (777mm) |
Package | 24" (H) x 8" (W) x 40" (D) |
Weight | Net Weight: 35 lbs (15.9 kg) |
Gross Weight: 48 lbs (21.8 kg) |
Available Color | Black |
Buttons | Power On/Off button |
System Reset button |
LEDs | Power LED |
Hard drive activity LED |
2x Network activity LEDs |
System Overheat LED / Fan fail LED / |
UID LED |
PCI-Express | 4x PCI-E 3.0 x16 slots |
(3x GPU/Xeon Phi cards optional) |
1x PCI-E 3.0 x8 (in x16) low-profile slot |
Hot-swap | 4x 2.5" Hot-swap drive bays |
Fans | 10x counter-rotating fans with optimal fan speed control |
Power Supply | 1600W 1U Redundant Power Supplies with PMBus |
Total Output Power | 1000W/1600W |
Dimension | 73.5 x 40 x 265 mm |
Input | 100-127Vac / 12.9A Max / 50-60Hz |
200-240Vac / 9.5A Max / 50-60Hz |
+12V | Max: 82A / Min: 0.1A (100-127Vac) |
Max: 132A / Min: 0.1A (200-240Vac) |
12V SB | Max: 2A / Min: 0.2A |
Output Type | 25 Pairs Gold Finger Connector |
Certification | Platinum Level Certified94%+ Platinum Level |
[ Test Report ] |
CPU | Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages. |
5 Phase-switching voltage regulator |
FAN | Total of ten 4-pin PWM fans |
10x fans with tachometer monitoring |
Status monitor for speed control |
Status monitor for on/off control |
Low noise fan speed control |
Temperature | Monitoring for CPU and chassis environment |
CPU thermal trip support |
Thermal Control for 10x Fan Connectors |
PSU I2C temperature sensing logic |
Thermal Monitor 2 (TM2) support |
PECI |
LED | Power Fail / Overheat LED |
Suspend-state Indicator LED |
UID LED |
Other Features | SDDC Support |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: |
10°C to 35°C (50°F to 95°F) |
Non-operating Temperature: |
-40°C to 70°C (-40°F to 158°F) |
Operating Relative Humidity: |
8% to 90% (non-condensing) |
Non-operating Relative Humidity: |
5% to 95% (non-condensing) |